The indoor gardening concept accelerates when vegetation and cultivation shrink. However, with indoor gardening, you must a proper LED grow lights and grow tent. Go for the best LED light for 4×4 grow tent because it is the perfect choice for indoor growers.
When focused on the plants, the light does not scatter with these LED grow lights. Light is evenly distributed throughout the grow room to maintain an ideal grow environment. They have energy-saving technology, different from traditional HPS systems, offering brighter light and energy saving.
They save energy to about 80 percent of the electricity costs and consumption, providing maximum coverage for all the plants.
These best LED lights for 4×4 grow tents have a higher PAR value and use an upgraded triple-chip LED that is much brighter and more efficient than other single or dual-chip LEDs.
Likewise, these lights are scientifically designed to maintain PAR/Lumen balance and allow your plants to benefit from natural sunlight. Also, they have upgraded aluminum heat sinks with a fast heat dissipation system, keeping the lights quiet and cool.
- Factors to consider when buying the best LED light for 4×4 grow tent
- 5 Best Led Light For 4×4 Grow Tent
- 1. MARS HYDRO TS Full Spectrum 3000 450W LED Light For 4×4 Grow Tent
- 2. iPlantop Triple-Chips 1000w Daisy Chained Design LED Grow Light
- 3. Uallhome Full Spectrum 200W LED light for 4×4 Grow Tent
- 4. Yuanhui YH400B Foldable Full Spectrum LED 400w 4×4 Light
- 5. VIPARSPECTRA 1200W Full Spectrum LED Light for 4×4 Grow Tent
Factors to consider when buying the best LED light for 4×4 grow tent
When buying the best LED light for 4×4 grow tent, you need to consider the power. LED lights should not be chosen by power, but the efficiency of different models is different, and glow with the same power can vary significantly in brightness.
The LED lights that replace a regular 60 W pear bulb can have a capacity of 6 to 10 W, and the lights that replace a 40 W “candle” can have a power of 4 to 7 watts.
The LED light brightness it gives, is defined by a luminous flux parameter, which is measured in lumens (Lm).
For the ordinary light, you can roughly estimate the required luminous flux by multiplying the conventional incandescent light power by 10: 60 W corresponds to l00 Lm, 40 W to 400 Lm, 100 W to 1000 Lm, and more.
So, if you are looking to buy an LED replacement for a 60W incandescent bulb, look for bulbs with at least 600 Lumens. Unfortunately, many manufacturers overestimate the value of the luminous flux.
It can be twice as low as stated and even more. The results of independent testing can only determine the actual values of the luminous flux.
LED lights with a 2500 to 3500K color temperature to have a warm glow. They should be chosen for an installation in recreation rooms. It is believed that they have a positive effect on human comfort. The models with soft yellow light are almost identical to that emitted by incandescent bulbs.
LED lights with a color temperature of 4000 to 5000K to have the so-called daylight. They are neutral and can be located in work areas. It can be offices and a kitchen, bathroom, etc. The brightest lights with a color temperature of more than 5500K have a cold light.
Their glow is very white with a bluish tint. A person is very sensitive to such light and receives a feeling of wakefulness in its presence. If you stay in a room with such lamps for a long time, you may experience a sense of fatigue over time.
When buying the best LED light for 4×4 grow tent, you need to consider the voltage. LED lights use different drivers (electronic boards installed in the lamp base).
Many models use stabilized drivers. The brightness of such LED lights does not change when the mains voltage fluctuates over very large limits.
Some shine equally brightly when the mains voltage drops from 230 to 70 volts. Unfortunately, manufacturers often do not indicate the actual voltage range. 220-240 V or 230 V may be written on the lamp’s packaging, but in reality, the light burns at a much lower voltage.
Twelve-volt lights are available with E14, E27, GU5.3, and G4 bases and can operate on DC and AC voltages.
Most microlights with a G4 base and some spot lamps with a GU5.3 base, when operated on AC voltage, have a very high light pulsation, which is harmful to the eyes and well-being in general. To avoid pulsing such LED lights, you will have to replace the transformers with DC power supplies.
Most LED lights cannot be dimmed, but unique dimmable LED lights are available that support dimming. These models work with most conventional incandescent dimmers, but the minimum dimming level can be pretty high (about 20%).
For the lights to be dimmed to almost zero brightness, it is necessary to use special dimmers for LED lights.
Ripple of light
The pulsation of light leads to eye fatigue and a general deterioration in well-being; therefore, it is imperative to use only those lights that do not have visible pulsation. According to SNIP for various types of premises, light pulsation is normalized in 5-20%.
A pulsation of up to 35% is imperceptible to a person. Other LED lights may have a low pulsation level, but this is not indicated in the light parameters.
The presence of pulsation can be checked using the pencil test or by looking at the lamp’s light through the smartphone’s camera. If there is pulsation, stripes will be visible on the screen.
Manufacturers indicate light life from 10,000 to 50,000 hours. No one knows how long a LED light will last in reality because technologies are improving very quickly, and all service lives are calculated theoretically.
It is recommended to pay attention not to the specified service life but to the warranty period, during which you can exchange a light that has failed.
Another thing you need to consider when buying the best LED light for 4×4 grow tent is the beam angle. You need to know the shape or angle of the light beam that comes out of the LED fixture.
The shape is described as a beam angle. Typically, the angle (light distribution) can be narrow or wide. If you have a narrow beam angle, you will concentrate the light into a smaller area, increasing the amount of light that shines.
If you have a wide beam angle, the light will be more diffuse. You will illuminate a large area, but you can scatter a light over a wider area, reducing the light on a surface.
Also, consider the cone-shaped light distribution of the LED lights. As the space from the light source increases, the dispersion also increases. This means that if you have high ceilings, you will need to choose an LED light with a narrow beam angle so that the light can reach the lighting surface.
Most of the LED lights for 4×4 grow tents come with a 1 to 5-year warranty. Stores must replace lights under warranty within this period if they fail. In addition, under consumer protection law, you can return the lights to the store within 14 days of purchase, and you will get a new one.
5 Best Led Light For 4×4 Grow Tent
1. MARS HYDRO TS Full Spectrum 3000 450W LED Light For 4×4 Grow Tent
Mars Hydro has developed the best LED light for 4×4 grow tent dedicated to providing commercially viable lights to indoor horticulture growers.
This is from professionals to hobbyists, increasing crop and yields marketability by adopting scientific designs, frontier technology, and high-quality components.
It has easy dimming and daisy chain function, like 30 multi-lights connected and convenient, leading light managed. The model has two waterproof drivers and an automatic sensing power supply that works on 240VAC, 277VAC, and 120VAC. This is ideal for commercial setups and large rooms.
It is infinitely close to the natural sunlight, ideal for all plants in the indoor growing stages, and has a fast plant response from flower to seed. It helps you achieve maximum quantity and quality, much better than the traditional HPS grow system.
Similarly, it comes with a noise free-fanless and high reflective LED light design that makes growing life quiet and easy. Equally important, it has fast heat dispersing material aluminum, which reduces glare lost to walls and aisles.
2. iPlantop Triple-Chips 1000w Daisy Chained Design LED Grow Light
The iPlantop model is paramount because it is energy-efficient and more scientifically than MH and HPS HID. It has a maximum coverage area of 5.5 x 5.5 feet and a core coverage area of 3.5 x 3.5 feet.
Additionally, this LED light has the VEG channel that promotes plant germination and the Bloom channel, which supports plant fruiting and flowering. It comes with super high PAR value, and upgraded triple-chips LED, making it much more efficient and brighter than single and dual chips LED.
There are two pieces of certificated cooling fans with thermal silicone that keep the light quiet and cool and do not hurt the plants. You will get 2mm holes on an aluminum panel to ensure heat convection and supplement LED that dissipates heat.
The model comes with a wavelength between 620 and 670nm and a Bloom channel power consumption of 55W. I really appreciate the complete spectrum design because it is ideal for an indoor planting experiment.
3. Uallhome Full Spectrum 200W LED light for 4×4 Grow Tent
If you are looking for the best LED light for 4×4 grow tent that is flexible to grow different plants for both bloom and veg stages, then go for this model from Uallhome. It provides a full spectrum, offering balanced and adequate lighting for the plant throughout the life cycles.
The light covers the entire spectrum, from IR and UV to blue and red lights. It has superior light output in the same case, which provides an optimal light level for both growth and photosynthesis, allowing the indoor garden to flourish and bloom year-round.
The model is ideal for small growth and can with different plant species, including both high light and low light varieties. Equally important, it has an upgraded suspension kit, which can be installed easily without the additional tools.
Additionally, it comes with a 6-feet power cord with a play usage and a simple plug. It is easy to add a convenient indoor yard in any home room, perfect for adding like the supplemental side panel in a grow tent when flowering.
There is advanced LED technology and an efficient 200W HID replacement. It runs cooler than the traditional light source and operates efficiently. More importantly, it has a lifespan of 100,000 hours, friendly customer service, and a 5-year warranty.
4. Yuanhui YH400B Foldable Full Spectrum LED 400w 4×4 Light
Many people are going for this LED light perfect for all growth plant stages. It offers 3000K warm light color, 660nm growing deep red color, and 5000K daylight color that can make it more uniform and accurately simulate the sunlight.
Its unique features help meet the whole plants’ growth cycle from seeds to harvests, including medicinal flowers, plants, vegetables, etc. It has an energy-efficient design where the light-emitting diodes are more than the same competing products.
The light has the RJ14 dimming and dimming knob where the brightness can be adjustable from 0%-100%. The daisy chain is about 100 units, which can meet the plant’s development process, including germination, flowering, fruiting, and nutrition.
I appreciate a grow light bar because it’s foldable for portable installation and easy placement. More importantly, the adjustable adapter comes with the RJ14 interface that can control different plant lights in sequences suitable for plants in a large area.
Moreover, this light adopts a full aluminum 6063 oxide heat sink with no noise and dissipates heat quickly. In the same way, it offers a 30-day free exchange and returns and a 3-year warranty service.
5. VIPARSPECTRA 1200W Full Spectrum LED Light for 4×4 Grow Tent
The VIPARSPECTRA product is the trusted brand in the lighting industry that has the best customer care with safe and quality features. It provides the ideal full-spectrum lighting that provides the plants in every stage, from flower to veg, with everything needed in natural sunlight.
Furthermore, it comes with fire-resistant iron housing and sturdy, durable construction. On the other hand, the bloom and veg switches are ideal for every growing phase. This light is large enough and hence offers a large coverage area.
I appreciate the advanced aluminum cooling heat sink and quiet, high-speed fans because they are ideal for heat dissipation. The VEG channel has white and blue LED required to encourage the early vegetation cycle and germinate seedlings.
This light is ideal for a 4.5×4.5 inches vegetative coverage at 32 inches and 3.5×3.5 inches flowering coverage at 24 inches. You will get the advanced cooling system ideal for easy heat dissipation.
The LED lights for 4×4 grow tent are ideal in the compound. Go for the above products because their dimensions are perfect for placing anywhere inside or outside the house.
They have the switches to control the lighting modes based on plant stages, which are convenient for plant growth and outstanding results. These products have high customer ratings, and their description, pros, and cons make them easy to buy.
The best-selling product is Yuanhui YH400B Foldable Full Spectrum LED 400w 4×4 light because it has a dimming knob where you can adjust the brightness from 0%-100%. Likewise, it comes with the full aluminum 6063 oxide heat sink that dissipates heat very fast.
This product has attained the above factors because it has a dimming knob to adjust the brightness. In the same way, it comes with the aluminum 6063 oxide heat sink, which dissipates heat very fast.