Choosing the right tool is very important in garden and lawn maintenance. If you can choose reliable equipment, then gardening will give you more positive emotions and enthusiasm. And the weed eater head is the tool you must-have for any gardener.
But, keep in mind that there are many models, and this can be difficult to select the right one in terms of high performance and durability. With the best weed eater head, you are sure of the best service. These weed eater heads have a line tension system and a split spool design that reduce vibration and ensure enough power to get the work done.
The interesting thing is about the weed eater head is that no assembly is required. You need to slide a line through the assembled head until parts of the line protrude from both sides, hold the easy grip collar, and wind a line in.
Thanks to the carefully designed inner wall, it considerably reduces the debris that enters the head. A head-treated disk gives the line twice the resistance as the standard line. Also, reloading is made very fast, and not much science is required to adjust the weed eater head. In addition, these heads are compatible with many brands on the market.
Types of weed eater head
1. Fixed head
The fixed head weed eater head uses individual pre-cut line lengths loaded into the weed eater head as required. No spooling or winding line is needed; however, the cut is stopped so that a new length of a line can be placed to the head each time the line breaks.
2. Bump feed
With the bump feed, the trimmer line is wrapped around the weed eater head spool so that the two lines protrude from opposite directions of the head. If you want to feed more line from end to end of the weed eater head while trimming, bump the weed eater head on the ground to allow more line to come out.
3. Automatic feed
Automatic feed, like more feed lines, does not require to be stopped to extend the line if breakage occurs. The automatic feed mechanism on these systems automatically sends more lines without bumping the head if the line seems too short.
4. Single line head
This type of weed eater head has one line wrapped around the weed eater head spool, and the line has the same length on each part of the weed eater head. The single line head is usually easier to trim than the dual line head because only one line is available.
5. Dual line head
The dual line head contains two lines that rotate opposite to the spool, providing extra cutting power and efficient cutting speed, cutting through thick the weed with ease. However, when the spool has two lines, the winding requires more time and effort.
Factors to consider when buying the best weed eater head
Shape and thickness of the grass
When buying the best weed eater head, you need to consider the shape and thickness of the grass. Weed eater heads are perfect for soft plantations and crops, while the best head allows you to change lines with blades.
If you have all types of branches and overgrown grass on the side, you should buy a model that allows you to change the blades and strings. This allows you to handle thicker grass easily and cut the weeds easily.
Size of a head
The size of the head is a very important factor when buying the best weed eater head, which relies on the garden size. The smaller head is suitable for smaller gardens as it requires less work. In the same case for large gardens, you need a head larger than 0.1 inches in diameter. So, the size of the head is important if you want to buy the best model.
Purpose
Once you know the purpose of the weed eater line and the head, you can choose the correct one. Whether you are working on deep underbrush or thick grass, you need to choose the head compatible with your job. Your gardening purpose will affect the type of head you buy.
Dual or single line head
When buying the best weed eater head, consider a dual line or single line head. Both types have pros and cons that must be well considered before purchasing. It is convenient to wind a new cutting line with a single weed eater head, but the grass isn’t cut very quickly.
Furthermore, this head is not ideal for professionals. The dual line head cuts grass and branches quickly and gets the job done quickly. Nevertheless, winding the string is difficult and needs some effort.
Compatibility
You can purchase the best weed eater head on the market; however, you need to ensure it has the compatibility feature. It is important to read the specifications of the model to ensure it is compatible with the weed eater. Today’s manufacturers are extremely precise in their weed eater heads, and they make sure they are compatible with common electric and gasoline weed eaters.
Blade type
Some weed eater heads contain blades instead of a wood eater line. Weed eater heads with the blades work greatly on dense bushes or thick weeds. Buy the weed eater head with the blade if you want to cut undergrowth.
When we talk about the blades, we are talking about the material. You can find some heads with plastic blades while others have metal blades. If you don’t want to damage the beautiful landscape or your trees, you can opt for the metal blades. They are very effective in treating dense bushes, but they may damage the trees.
In addition, you can choose the weed eater heads that have the wire brush, but if you don’t need the blades. This may be a perfect idea if you need to work on the stone path or the pavement.
Safety
Safety is also an important factor when buying the best weed eater head.The head can pierce skin easily and throw debris when cutting. Go for the model with a guard to control most debris, but you should also wear gloves, goggles, long pants, boots, and hearing protection.
Ease of use
When buying the best weed eater head, you need to consider the ease of use. This is the deciding factor between the products you love along the product you hate. For the weed eater head, this means how easy it is to carry around.
It is recommended to check this feature before purchasing. The last option you need is to extend that all-important yard work. Find products where the procedure is simple and easy to use.
It is also recommended to check the variety of string sizes supported by each model to ensure your favorite is listed. Many heads accept more than one, adding to their ease of use and versatility. There must also be power when joining different diameters of a line.
Warranty
Warranties offer you the peace of mind that the model is high-quality and genuine. Also, they offer you the peace of mind that the investment is secure. In any case, you can return the defective product if necessary. One thing to keep in mind with your warranty is to read the conditions and terms. This will help you know if the product is protected or not.
5 Best Weed Eater Head
1. Oregon 4-1/2-inch Speed Feed Weed Eater Head
The important thing about this best weed eater head from Oregon is that it loads trimmer line within 30 seconds or less. It is long-lasting, easy-to-use, and durable, ideal for DIYers and homeowners. In the same way, it fits the brands like Echo, Stihl, Troy-Bilt, RedMax, and many more. You will get high-quality nylon polymer material, which is long-lasting.
The spool holds 15 feet of 0.095-inches trimmer line with the maximum line size of 0.105-inches of any shape. Equally important, this model has an automatic and rugged bump feed round head that effectively tackles heavy-duty to medium weeding or edging. Every time you redecorate your yard, this weed eater head works hard as you can do.
No disassembly is required because you need to slide the line in the head while waiting for half the amount to be included on every side of the grasping head for easy wind line in and grip collar. On the other hand, this product can be used on many straight shaft weed eater heads using 7 mm x 1.0 right hand, 10 mm x 125 left hand, and 8 mm x 1.25 left hand.
2. Weed Warrior Universal Fit EZ Lock Weed Eater Head
If you are looking for an ideal weed eater head for edging, trimming, and weed eating, then go for this model from Weed Warrior. It is ruggedly made from high-quality material, making it fit different line sizes. It uses pre-cut line strips, which saves you the hassle and time of spooling the line without opening the head.
Similarly, it is easy to install because you need to remove the old thread and head on an EZ lock, including an adapter and hardware if needed. It fits 105/1000-inch to 80/1000-inch diameter lines. It is compatible with almost all cordless and gas string trimmers brands, including Stihl, Echo, Husqvarna, Ryobi, Redmax, Cub Cadet, Poulan, MTD, Weed Eater, and more.
Thanks to abrasion resistance and superior durability, it will withstand the high demands of any task. You can load and reload the head with the pre-cut line strips within seconds, saving you frustration and time. The easy and quick line load prevents the tangling of the string on a spool. This is because of the inner head part sectioning that the string doesn’t hinder and tangle the working.
3. Husqvarna 537388101 T35 Tap Advance Weed Eater Universal Head
Many people are going for this best weed eater head from Husqvarna because it fits most Echo, RedMax, and Stihl straight shaft trimmers and Husqvarna straight shaft trimmers. Its advantage is that it is fed automatically when the head is pushed into the ground. In all honesty, the package is included with the adapters, which enables it to be attached to many brands.
Furthermore, it has an easy-to-reload spool, which comes with a cap to eliminate the need to overturn the trimmer to reload a line. In the same way, the spool comes with a split design that reduces line welding and tangling and has arrows to display the correct directional line winding to eliminate guesswork.
Moreover, the spool has two key slots that prevent the line from unwrapping and lock a trimmer line in while putting a cap back on a trimmer head. The model can hold .080″, .065″, or .105″ or .095″ trimmer line and comes with about 28 feet of 0.095-inch gauge line. Also, it is easy to use, and the winding mechanism does not need more knowledge.
4. KIPA Tungsten steel Durable 10-Inch Diameter Weed Eater Head
The interesting thing about this product from KIPA is that it will not wear after a long cutting. It comes with tungsten steel that can last ten times longer than plain steel but does not cost ten times more, creating incredible value. The model has a great performance with wear characteristics.
Furthermore, it cuts well like a champ and has a great blade, which means everyone can go for it. On the other hand, it fits most straight shaft trimmers, including Stihl, Sears, Husqvarna, Husky, shindaiwa, Poulan, Echo, Redmax, and many others. In the same way, the model comes with three teeth and is 10 inches in diameter.
It fits a hole that is 1-inch, making it universal. Nevertheless, you need to check the diameter of the weed eater head. There are two small discs in a package. This means you need to ensure you fix them in the trimmer from every side of the blade. All you need to do is apply a cotter pin at the end.
5. HUZTL Universal High-Quality Weed Eater Head
This tool from HUZTL is a combination of efficiency and high quality. It has many benefits, making it the best model in the market. For one thing, this eater head comes with adapters that fit both curved shaft and straight-shaft trimmers. It can fit many popular brands like Echo, Husqvarna, Honda, Maruyama, Shindaiwa, RedMax, and Stihl.
Additionally, it comes with high-quality plastic material with a smooth surface to make it more durable and easy to use. It is easy to open a cap because you need your hand to change a trimmer line. Equally important, it comes pre-loaded with the 8 feet of 0.095 high-quality trimmer line that can hold to about 20 feet of 0.095 trimmer line.
Moreover, it comes with the operation instruction, making it convenient to use the eater head. Similarly, it is easy to reload a spool with a cap, which eliminates the need to overturn the head down to reload a line. When you receive the model, you must check whether it fits you before ordering it.
Conclusion
With the best weed eater head above, you are sure of the best service. Now you know the features of different weed eater heads in the market. While every product is distinctive and has unique features, you need to consider your needs, related factors, and choices. Likewise, it would be best to consider the product’s safety because it is critical to every person.
HUZTL Universal High-Quality Weed Eater Head is the best-selling product because it has a high-quality plastic material that makes it durable and easy to use. Likewise, it is easy to reload a spool with a cap to eliminate the need to overturn the head downward to reload a line.
This product has attained the above factors because it has high-quality plastic material that is durable and easy to reload a spool.