Skip to Content

How Long Does It Take To Grind A Stump – Important Information

Sharing is caring!

If you do not have ideas for transforming a stump or do not want it, you’ll need to remove it. One way to get rid of a tree stump is to grind it to the ground.

Not only does it eliminate the risk of you or a family member tripping over the tree stump, but it also eliminates bugs and insects because there’s nothing attractive about them.

When homeowners hear about grinding a stump, the most common question is, how long does it take to grind a stump?

Typically, it is hard to tell the right time as it relies on many factors like the type of tree, the stump’s location, the stump’s size, the type of grinder being used, and the condition of a stump, among others.

How Long Does It Take To Grind a Stump
Stump_Grinding via Flickr

How Long Does It Take to Grind a Stump?

Many ​​variables can be used to answer this question.

For the general answer, grinding a stump takes about 30 minutes to one hour to complete the whole process. This time can decrease or increase depending on some of the following variables:

  1. Equipment used

This is perhaps the biggest variable. Typically, if you hire a grinder to take care of the stumps, you need not worry, as a very efficient stump grinder is used to get the job done quickly.

If you do this yourself, it will take more time if you have a less efficient machine. Essentially, it will take extra time if your grinder does not have a hydraulic system. Without hydraulics, you’ll have to use a lot more labor to grinder the stump, which will increase your time.

  1. Stump size

That goes without saying. In general, the more effort, the longer it will acquire to grind, regardless of what kind of machine you are using.

  1. Wood types

The wood type in the stump has a great influence on the grinding time. Hardwood tree stumps such as oak, hickory, and maple take longer than softwood like spruce, pine, redwood, etc., to grind through.

  1. Location

When the stump is removed from all kinds of external structures, grinding it will take little time. In such a situation, you can start the machine and grind the stump.

If a stump is very close to the structure, a precision grind must be planned and performed to avoid damage to underlying gas, power lines, water, or design. It may take a little longer.

Stump grinding on the Stage How Long Does It Take To Grind a Stump
Stump grinding on the Stage
cc-by-sa/2.0 – © Richard Hoare –

>> Related Post: How to Killing Tree Stumps With Bleach Effectively & Easily!!

Tips and Tricks for Stump Grinding

To grind wood effectively, quickly, and with little effort, you need to consider some tips, which include:

1. Use the correct grinder

A tree cannot be ground if you utilize the wrong grinder. If you do the work yourself, you won’t need to purchase a grinder; only rent it.

When renting, please pay attention to its specifications and size, as no two models are alike. Choose a bigger stump grinder with extra size and power if you have a large, sturdy trunk.

Getting the right grinder is important but not enough because you need to follow the correct procedure for grinding the tree. These procedures use the lever to position the wheel some inches above a stump.

Also, they move the wheel so that it is directly over the front of a stump. You will then need to turn the wheel and lower it to be in the 3-inch position.

Use the lever to shift the wheel from side to side and sand the stump until it is 4 inches off the ground. Do not force the grinder inside the stump. In its place, lightly grind the surface.

2. Use the grinder correctly

Using the correct grinder is one thing, and the entire ball game of using it correctly is another thing. Follow these tips to get the most out of your model.

When unloading and loading the machine after rental, ensure the ramps are of accurate load capacity and have enough length so that the unloading and loading angle is acceptable.

Also, make sure the ramps have been steadily attached to the trailer or truck. While grinding, concentrate on the chip discharge direction and move the screen and any obstacle or reposition the machine.

If there are extra chips beneath the machine, discard them as too much chip build-up may seriously affect the machine’s performance. Even if the grinder is loud, you should be aware of any additional noise or vibration.

3. Prepare for working area

You do not want to spend your whole time grinding the stump. To save time, you need to prepare your working area carefully and correctly.

Start by dividing the site and creating a clear barrier or boundary surrounding it. This will prevent pets and family members from walking in when grinding.

Then you need to prepare a stump that needs to be grounded and remove the debris, rocks, and stones around it. This will prevent damage to the grinder blades.

The Correct Removal Procedure of the Stump

For the best results, you must take the correct steps for proper stump removal, which include:

  1. Prepare the working area

With lots of stones and debris in place not only complicate the process but also put the risk of hurt. Therefore, for safety reasons, remove all rocks and debris from the area before grinding.

  1. Move the grinder in position

When the area is cleared, set the grinder and start working. To save time, make sure the angle is at ease. If you need to adjust the placement of the handle, do not do it when the grinder is on but turn it off first.

  1. Grind the stump

Now you should start grinding to stump. Reposition the grinder to increase efficiency. Also, alter the angle as you drop from 80 to 100mm on a stump.

  1. Reposition the machine

Once the stump is reduced to ground level, you need to push the machine toward the middle of a trunk and rock the wheels. Then adjust the handle to the ideal height and then grind it until you have a cleared space.

  1. Cover the area with some soil

After grinding the whole stump, put off the grinder and top up the hole with wood chips and fresh soil. If you like green lawns, plant the grass seeds in the area.


Grinding stumps is the main effective and efficient way to remove stumps. If you choose to grind stumps, you can ensure that all stumps will be removed, eliminating the hazards and protection risks of a bare stump.

Grinding the stump also ensures that ants, termites, snakes, bees, and other pests don’t have suitable nesting sites. Also, grinding them rather than removing them requires less impact on the landscape. With this article, you know how long it takes to grind a stump.