Skip to Content

How Many Plants In A Flat (Crucial Guide)

Sharing is caring!

A flat is considered as a tray, made of plastic that is made to facilitate transporting and watering groups of plants. Many plant packages have the spacing and size listed on a label.

When purchasing, always ask how many plants are in a flat. Otherwise, you will find information in the paperback books on the ground or landscaping covers and on the Internet. It is good to use your time for this because thousands of plant species can be found in a flat.

How Many Plants Are In A Flat
via Pxhere

How Many Plants In A Flat?

The flat that holds the plants in separate pots has different standard sizes. Each one can store a different number of plants. These flats include:

1. Standard flats

These are the most common flats, which are long and narrow rectangles that can hold 18 square pots with the plants, measuring 3 1/2″ or 4″. They are known as daisy trays because they have a wide bottom grid that can ensure good drainage. Also, they can hold six-packs of 2″ or 12 packs of 1″.

How Many Plants Are In A Flat 2
via Pxfuel

2. Anderson flats

Anderson flats are sturdy, wide, and rectangular, which have a small-grid bottom and 3/4-inch edges on each narrow end. They come in various sizes, though the most common is the Portland flat that holds 25 plants in 4-inch jars.

3. Molded and square flats

The most common molded and square flats have the bottom with spaced grid lines, holding 25 plants of 3 1/2-inch pots or 16 plants of 4-inch pots.

Some of them have molded cups that can hold square or round pots. Although the capacity varies, molded and square flats contain fewer plants as the bands molded create space between the jars.

How Do You Grow Plants in a Flat?

1. Water the soil

First, water the plants well before they enter the soil. They grow in a small amount of dirt and quickly dry and wither. You will save a lot of money if you carefully select the good plants by watering them.

The soil you plant in a flat is drier than the one is used, and if you like to work in a spring garden on sunny days, make it good before planting. Keep the soil moist after planting, preferably watering in the morning and at night.

2. Remove the flowers that are blooming

Cut out any blooming flower. It is hard to remove, but other flowers will replace them, which will create a stable and healthy root system. This is done when the climate is sunny and dry. Pinch or cut the flowers before putting them on the ground.

3. Loosen the roots

If you loosen and cultivate the soil, you’re all set for the new plant. What is needed is to pop them in. You can skip this step, but if you want the plant to reach its full potential, take care of this all-important root system from the start.

When removing the plant from the growing pack, gently slice it or shake it using garden scissors, a sturdy twig, or hands (whichever works) to remove the roots mainly, if they have surrounded the plant or knotted to the base.

When you notice the roots are curling up in a pot’s shape, carefully spread and put them in a planting hole. This step requires extra effort and time at the start, and the plants will establish sooner and much better. It sounds weird, but believe me, it will make a big difference.

4. Care for the plants

Make sure to keep the new plants moist. Once you have well-made compost, add a handful to every plant or add to a slightly larger area that you want to plant.

Fill in the soil around the plant and water well to keep the plant moist for the first week. If it is a hot and sunny day, you can tilt the pot to keep it in the shade the first day or later if you like.

How to Measure the Distance Between Planting in a Flat

1. In a traditional row garden

The soil needs to be prepared for the part of the garden where you are planting seedlings or seeds. Traditionally, gardeners plant all kinds of vegetables in different garden rows, hence creating the patchwork effect. You need to measure the width and length of each part of the garden.

Read the instructions at the seed packet in the back to find the optimal distance for the first variety planted. You will find the space between floors and between rows.

Divide the garden width between the rows and the length of the garden by the distance between the plants. This can give you enough space between the plants.

Measure the garden plot from the edge inward to the middle of the required row spacing. Mark this point with a stick.

Measure from that branch to the opposite edge of the garden and measure the distance between the rows of the yard. Mark this point with a bar. Continue marking and counting until the plot is drawn edge to edge.

In the first row, plant after the first inserted stick. Measure the distance between the plants with a bar and plant the first seedling or seed.

Re-measure the space between the plants in a similar direction and plant another seedling or seed. Continue in this row and all the flowing rows in a like way until the area is complete.

2. In a square foot garden

Mark the square feet in the square foot garden using the sticks every 12 inches and strike the string between them. One square foot of the yard is intended for the intensive gardening method.

This means the plants need to be placed as close to one another as possible instead of the traditional rows in blocks. Many square foot gardens are about three to four blocks down and wide for easy access from the inside.

Read the guide at the back of the seedling tab or seed packet and determine the shortest distance between the plants. Manufacturers often specify a range, for example, B. 2-3 inches.

Measure the distance between the plants from the top of the square and draw a line on the ground with one finger to mark this point. Also, draw a line from top to bottom.

Measure the same distance again from that line and draw another line. Continue like this until the square is filled.

Likewise, measure the soil in the other direction of the yard and then mark the lines by creating a small design grid on the soil surface. Then plant a seed or seedling in two rows.


How many plants are there in a flat becomes a crucial question, which every gardener can ask. The standard flats become the most common flats since they are long and narrow rectangles, holding 18 plants in 3 1/2 or 4-inch square pots. So, with this article, you will get the correct information.