Skip to Content

How To Make A Lawn Mower Faster in 9 Easy and Proven Ways

Sharing is caring!

Cutting grass and removing weeds from a lawn can be a difficult undertaking. Of course, you can utilize a ride-on lawn mower. But, if its speed is only ordinary at best, how will it be effective in making your work easier?

You’ll have a difficult time with the lawn mower. You may decide to adopt alternative lawn care solutions such as garden grass swords at some point. All dislike such time-consuming approaches.

Nobody wants to travel back in time and utilize old lawn-care equipment. You can, however, enable your lawn mower to go quicker.

However, you must consider lawn mower parts that can affect the speed for this to happen. If you want to know how to make a lawn mower faster, you’ve come to the right place.

How To Make A Lawn Mower Faster: 9 Proven Ways

Use High-Quality Lawn Mower Parts For Your Machine

The equipment you utilize for lawn mowing defines how well your lawn is maintained. You can go with cheap lawn mower parts, but the difference in quality will be felt when used.

If you desire a faster lawn mower, then you’ll have to use high-quality components. You can utilize better parts for your lawn mower motor. They are often needed to make the engine strong enough to work optimally.

You should also pay attention to essential accessories such as lawn mower blades and belts. High-quality belts will stand the test of time. They won’t break as easily as those that are cheaply made.

Cheaper blades will have a more difficult time with grass and weeds, especially tough ones. Perhaps the lawn mower belts may need to be replaced from time to time, thanks to their high-quality design.

As you can see, using high-quality lawn mower parts for your machine can be an effective way to make a lawn mower faster. It’s the only way to ensure it performs at its full potential.

Keep Up on the Routine Maintenance

Routine maintenance is a process that every lawn owner should care for. Not only does it keep your lawn mower in top shape, but it also keeps it operating at full speed.

For example, if you neglect to keep the blades clean and sharp, they’ll struggle with grass and weed cutting. As a result, your lawn mower won’t be fast enough to handle the job.

The same is true with gas. Gas that isn’t fresh can slow down your lawn mower. Fresh gas is mixed with high-octane components to increase its effectiveness and horsepower.

The best way to keep your lawn mower operating at full speed is to clean it and replace the blades regularly.

You should ensure that you’re using the proper gas for it. If you do all of these things, then your lawn mower will be faster than ever before.

Inspect the Tires Before Operating

The tires of your lawn mower are responsible for making it move. If they aren’t working at their best, you may not be able to mow the lawn promptly. The quality of your tires can be difficult to notice.

They won’t show signs of wear and tear right away. However, if you can spot differences with your tires, it’s best to change them as soon as possible.

What you can do is carefully inspect them from time to time. If you see any signs of damage, it’s best to replace the worn parts as quickly as possible.

If you don’t, then the speed of your lawn mower will be significantly reduced. This is because you won’t handle the job the way you want.

Keep Your Blades Sharpened at All Times

The blades of your lawn mower are responsible for cutting down grass and weeds. The sharper they are, the more efficiently it’ll do its job.

Keeping them sharp will ensure that you don’t have to do the job more than once. Dull blades will make it difficult for your lawn mower to cut through thick grass. It’ll also result in a long process for you.

To keep your blade sharp, you can sharpen them with a lawn mower sharpener from time to time. You can check the blades before each use to ensure there isn’t damage on them.

If there’s any, it’s best to replace them as soon as possible. A damaged blade can cause an accident during the mowing process. It’s also slower than one that is functioning at its best.

Check the Oil Level

Oil is what keeps your lawn mower’s engine running smoothly. If it isn’t properly oiled, then the quality of its performance will be reduced.

Low oil levels can cause the engine to wear out quickly, so it’s important to check them before using your lawn mower. It’s best to check the oil before each use.

However, if you’ve been using your lawn mower a lot recently, then it’s best to check the oil level at least once a month. If you can’t, check them every time you finish mowing your lawn.

Check the Air Filter

Air filters keep the dirt and debris from getting into your lawn mower’s engine. They also help it to run at full speed efficiently. If you don’t check your air filter regularly, it can accumulate too much dirt.

When this happens, you won’t be able to use your lawn mower. That’s because the dirt will block its features, making it difficult for you to operate your device.

To check your air filter, you’ll need to take it out and wipe the dirt off of it. You should also switch it to a new one if necessary.

Keep in mind that air filters are very cheap, so be sure to buy several ones at a time to have on hand for when you need them.

Change the Oil Regularly

Another thing you should do when maintaining your lawn mower is change the oil on it. To keep your lawn mower running at full speed, you should change the oil as soon as it starts to run low. When changing the oil, make sure to drain all of it out first. Then, replace it with new oil.

Oil changes are significantly cheaper than repairing a broken engine. In addition, new oil will ensure your lawn mower functions at its best.

When you do this regularly, you won’t have to worry about leaving your lawn mower sitting for a long period. It’ll be ready to use as soon as you want it to.

Clean the Lawn Mower’s Deck Frequently

The deck is what you roll your lawn mower over to cut grass. If you don’t clean it regularly, the grass will pile up. This will make your job significantly more difficult because you won’t be able to see where you are cutting.

To clean the deck of your lawn mower, you’ll need to remove anything that’s on top of it. Then, use a hose to spray down the deck and remove all leftover debris. Wipe it down with a cloth to dry it out completely.

If you neglect your lawn mower’s deck, then it’ll be harder for the blade to cut through the grass. The blade will also come in contact with more debris, making it less effective over time.

Use a Bigger Pulley

A bigger pulley can go a long way for your lawn mower. You should use one if you notice that it’s taking much longer for you to finish mowing your lawn.

The bigger the pulley is, the faster it’ll cut through the grass. You can use a 3-inch pulley if you want to cut your mowing time in half.

To use a bigger pulley, you’ll need to increase the speed of your engine. This can be done by replacing your smaller pulley with a bigger one.

If you use a bigger pulley, it’ll help cut down your mowing time. You’ll also be able to complete your entire lawn without stopping too frequently because you won’t get as tired as quickly.

Make sure to use a bigger pulley if you have a lot of lawn to mow and your lawn isn’t flat.

>> Related Post: How To Make A Lawn Mower Go 30 Mph in 10 Easy Ways


Final Remarks

If you follow all of these steps, then your lawn mower will last a long time without any major repairs. It’ll also be ready for use whenever you want it to be. You can then save a lot of money on your yearly lawn mowing bill by keeping your lawn mower in good condition.

Keep in mind that you should also get rid of your lawn mower if it’s broken beyond repair. This is because attempting to fix it may cost you more than what the lawn mower is worth. Now that you know how to make a lawn mower faster, lawn mowing can be a breeze now.