Skip to Content

How to Propagate Ruby Cascade – 5 Amazing Instructions

Sharing is caring!

Peperomia rotundifolia is also commonly called the jade necklace, ruby cascade, trailing jade, creeping buttons, and round leaf peperomia. This lovely plant originates from the tropical forests of South America. It can make a beautiful hanging plant for your home, and you can learn how to propagate ruby cascade quite easily.

Ruby cascade is a juicy, succulent plant with thick round-shaped leaves and a gorgeous jade green color. The most striking feature of the ruby cascade is its dual shaded leaves.

It has ruby red shoots and jade leaves which have ruby-red backsides. Peperomia ruby cascade is a perennial plant that is very easy to care for.

Ruby cascade has strikingly vibrant and beautiful round leaves, and the cascading shoots make it perfect for hanging at the patio or indoors. Learn how to propagate ruby cascade through our simple and helpful instructions.

How to Propagate Ruby Cascade 1
Any tips for peperomia ruby cascade propagation – via Reddit

How to propagate Ruby Cascade

Ruby cascade is a fairly easy plant to take care of and propagate. It can be propagated through stem cutting, leaf, or division. Follow our simple guide to learn how to propagate ruby cascade.

Tools You Will Need

When to Propagate Ruby Cascade?

The best time to propagate ruby cascade is during the early spring reason. It is the season when the plan is ready to grow after the cold season.

You can use any method to propagate. If you are using water to propagate, then be sure to cover your transparent jar to avoid algae growth.

In this guide, we will use the propagation method through stem cutting as it is the easiest and gives the most effective results.

Step-by-Step Instructions

Now that you have assembled your tools and learned the basics, learning how to propagate ruby cascade through simple steps is time.

Method 1: Propagation Through Stem Cutting

Follow these steps to propagate your ruby cascade using stem cuttings. All the steps are similar for propagation through with only one difference. Instead of using a potting mix, use water in a jar for propagation through the water.

Step 1: Prepare the Potting Mix

Start by choosing a pot and preparing the appropriate growth medium for the ruby cascade cuttings. The best potting mix to use here is peat moss and perlite in the ratio of 1:1.

Step 2: Water the Potting Mix

Run water through your potting mix thoroughly, and then let it drain to get rid of excess water. Gently squeeze the peat moss to drain water from it. It would help if you had the potting mix moist, not drenching wet.

Step 3: Taking the Stem Cuttings

Choose a few healthy stems from the plant. Cut about 4 to 6 inches of the stem with a couple of healthy leaves on top. Use a sharp knife or scissors to take the cutting, and be sure to sterilize them with rubbing alcohol before using them.

Make sure that the cutting point is closest to the leaf and cut at an angle of 45 degrees.

Pro Tip: Cutting at an angle of 45 degrees provides maximum area for rooting.

Step 4: Removing Extra Leaves

Now remove the lower leaves from the stem of your cuttings, leaving about four or five healthy leaves on top. Let the cuttings rest for a while and call them to heal the wounds, as they are semi-succulent plants. It will help prevent bacterial infections and rotting.

Step 5: Apply Rooting Hormone

Once your cuttings have callused, dip their ends in the rooting hormone. It is preferable to use a gel-based rooting hormone. If you are using a powder rooting hormone, you will need to dip your cuttings in water.

Step 6: Planting The Cuttings

Take a small stick and poke holes in the potting mix about one or two inches deep. Now, carefully place each cutting in a hole and cover it with the soil to hold it in place. Ensure at least two growth nodes are present on your cutting submerged in mud.

Step 7: Taking Care of Your Cuttings

Place your cuttings somewhere with bright indirect sunlight. Avoid placing them in direct sunlight or near heating or cooling systems. Maintain a temperature of about 70 to 75 degrees or 21 to 24 Celsius. Keep your potting mix moist but do not overwater. It may cause rotting, and the cuttings will wilt and die.

When to Expect the Cuttings to Grow?

After about one or two months, the cuttings would have developed roots. You will notice the formation of new buds. Once the fresh leaves start to grow, you can replant your cuttings. Scoop it with a trowel and place it in the other pot.

Pro Tip: If you are propagating in water, let the roots grow for a little longer before repotting. Because the seeds grown in water are more fragile, and there is no soil to support them while scooping them.

How to Propagate Ruby Cascade 2
Propagating Peperomia Ruby Cascade – via Reddit

Method 2: Propagation Through Division

Follow these simple steps if you are interested in learning to propagate ruby cascade using divisions.

  1. Take the plant out of its container carefully.
  2. Brush off the excess soil and examine the roots for any sign of rotting or damage.
  3. Now inspect the healthy parts of the plant and can be divided from the parent plant without damaging it.
  4. Trace down the individual stems to their root networks and separate them from the rest of the plant.
  5. You can use a sterilized knife to separate the sections.
  6. Divide the plant into 4, 3, or 4 parts depending on how big and healthy your plant is.
  7. Ensure each division has its stem, leaves, and root balls.
  8. Once the divisions are ready, please place them in the potting mix in separate pots.
  9. Each division will grow into a new plant over a couple of months.
  10. Keep caring for the divisions like you normally would care for your plant.

Essential Care Tips for Ruby Cascade

Remember the following caring tips while growing and propagating the ruby cascade plant. Keep in mind that this plant hails from tropical forests, so you need to provide similar conditions to keep the plant healthy.

  • Use a potting mix of peat moss and perlite. Avoid soil or clay.
  • Keep the potting mix moist but do not overwater. Let the mixture dry a little between each watering session.
  • Keep the humidity level about 70 to 90%. You can use an air humidifier or water mister to increase humidity.
  • This plant prefers bright indirect sunlight. Do not expose it to the sun directly.
  • Maintain a warm temperature of about 65 to 80 degrees.
  • They usually do not need fertilizers and are very easy-going. However, if you feel the need for fertilizer, you can use succulent fertilizer and dilute it before using it.

Conclusion

Ruby cascade has very cute button-shaped leaves. And the enchanting dual-colored leaves in the shades of jade green and ruby red are just swoon-worthy. Its trailing nature can be a beautiful hanging plant for your home.

If you want to get more ruby cascade plants for your house, you can easily propagate them without buying new ones. We have shared very helpful instructions on how to propagate ruby cascade like a pro. Please leave us your kind feedback in the comments section below!