Skip to Content

Sansevieria Night Owl – 3 Propagation Methods and 6 Care Tips!

Sharing is caring!

If you include the Sansevieria Night Owl in the indoor plant collection, you will be making the proper choice. It is a more recent hybrid of the well-known Hahnia cultivar. It belongs to the Dracaena family, with 70 succulent plant species native to Madagascar, Africa, and South Asia.

It is very effortless to grow and maintain the plant unaffected by harsh conditions even when cultivated by total beginners. On the other hand, the Sansevieria thrives in bright indirect sunshine and low humidity.

It should be watered only in the case of absolutely dry soil. In this article, we’ll go over everything you need to know about propagating a Sansevieria Night Owl using 3 different methods and the 6 tips care guide for its growth and maintenance.

Snake Plant, also known as Mother-in-Law’s Tongue, Sansevieria Night Owl, is a cultivar with lustrous, dark green spear-shaped leaf encircled by creamy-yellow variegation.

They’re among the hardest houseplants since they store carbon dioxide from the night to use throughout the day, then release oxygen via photosynthesis when their pores open at night. This allows it to clean the air as efficiently as possible.

Sansevieria Night Owl
Sansevieria Night Owl via Reddit

A Guide On How To Propagate Sansevieria Night Owl Using 3 Methods

Plant propagation is multiplying a plant collection using cuttings taken from the parent plant. This plant can be propagated in various ways, including division, cuttings in soil, and cuttings in water.

1. Propagating Sansevieria Night Owl by Division Method

  • Remove the plant from the container with care, remove any soil, and sprinkle the root with water.
  • When the root is completely clean, and you can see where each shoot is growing, separate them with a sterile tool, along with a portion of the root ball.
  • Plant the new ‘Night Owl’ in a tiny pot with a diameter of one inch less than the root diameter. The container must include a drainage hole, and the substrate should be a half-and-half combination of perlite and regular soil or sand.
  • Water the newly planted , allowing excess water to drain before placing it in a shady spot.

2. Propagating Sansevieria Night Owl Using Cuttings in Soil

  • One inch above the substrate’s surface, cut off a healthy, growing leaf.
  • The cut should be allowed to dry and form a scab by leaving the leaf in the air for a few hours.
  • Place the leaf in a damp mixture of substrate and perlite or sand in a container, ensuring that one-quarter to one-third of the leaf is in the substrate.
  • You can place a lot of leaves in one pot to get a lot of plants at once.
  • The rooting process can take 1-2 months, but new leaves will only appear after six or seven months. So, at this moment, your patience is quite valuable.

3. Propagating Sansevieria Night Owl Using Cuttings in Water

  • Place the leaf or sections of the leaf in a glass of water with a quarter of their total length above the water level.
  • Maintain a warm environment with enough filtered light for the glass because the roots process takes a long time, approximately 2 to 3 months.
  • Keep the water level consistent by adding lukewarm water regularly.
  • To prevent the growth of bacteria that can cause the cuttings to decay, change the water regularly.
  • Transplant the fresh into a cactus soil mix or any self-made substrate when mustache-like roots develop along with the cut.

A 6 Tips Care Guide for Sansevieria Night Owl

Sansevieria Night Owl 2
Sansevieria Night Owl via Reddit

The Sansevieria Night Owl is simple to look after. The plant can be grown and cared for by even the most inexperienced gardener because it not only tolerates unfavorable conditions but is also nearly unviable to kill. However, if given proper care, it will grow into the greatest and most lovely plant you’ve ever seen.

You will need to provide the best care factor possible for a healthier and better plant, including its watering, light, temperature, and humidity requirements, among other things. Let’s look at the most important aspects of this plant’s care.

1. Light and Natural Habitat Requirements

  • It’s a resilient plant native to Madagascar, Africa, and South Asia that flourishes in any setting, including indoors, with the exception of the south window sill, where it’ll be exposed to intense sunlight for hours. As a result, the plant needs indirect lighting to feel at peace.
  • Because it is one of the few species that will endure or thrive under artificial illumination, putting the plant distant from a light source may not represent serious harm to it. As a result, it is a typical design potential for rooms with limited natural lighting.
  • However, when it receives direct morning light, it expands quickly and bears more vibrant patterns and colors on the leaves; therefore, the placements cross the East windows are ideal.

2. Water Requirements

  • It is a succulent plant that stores the water in thick, pointed leaves present on it. Therefore, it can comfortably withstand lengthy spells of complete substrate dryness.
  • When there is a water deficit, it is much easier to maintain than plenty of water. As a result, it is unnecessary to water it more regularly, unlike many other houseplants.
  • Water it once fortnightly during the growing season, while only once-monthly is recommended during the winter. Before you irrigate the soil, make sure it is completely dry.
  • Again, every time you water the plant, make sure to check the tray of the pot after 10-minutes or so to see if there is any excess water that has plugged it.
  • This plant can withstand any situation; however, it is extremely sensitive to water, so make sure the tray is empty.

3. Humidity Requirements

  • Because this plant is native to naturally warm and dry air environments, it may easily adapt to growth circumstances in common interior locations in terms of humidity. It will also not necessitate any more moisture or leaf spraying.
  • It is quite OK to wipe away dust specks with a moist cloth regularly, as this will rejuvenate the leaves. Furthermore, you must avoid wetting the plant’s aboveground section when watering.
  • The reason for this is that when water rushes via its thick, smooth leaves and settles inside the rosette’s heart, it can cause the leaves to decay or discolor.
  • This plant can thrive outside the garden in its natural environment, the United States climate zone 9-11, on the condition that the soil is not excessively moist and is well-drained.

4. Temperature Requirements

  • This plant grows best when potted and shielded from the elements in other zones, where winter temperatures are below freezing.
  • It thrives in a space that is between 55 °F – 85 °F or 12 °C – 29 °C).
  • Even with this, the plant shows great patience and tolerance in this scenario.
  • Unlike many other indoor plants, Sansevieria will persist for many weeks in a place experiencing a drop in the temperature of roughly 45 °F or 7 °C).
  • However, it seems unconcerned in the summer if the temperature hits 100 °F or 37 °C or not, as long as it is kept out of direct sunlight.

5. Soil Requirements

  • The soil condition is among the most critical needs for this plant.
  • You must make sure that the soil is both airy and absorbent.
  • This is due to the fact the Sansevieria will struggle in strongly compressed soil that maintains moisture for an extended period.
  • The ideal application method is to purchase a cactus mixture that has already been prepared.
  • Other methods can also be employed to improve the soil, such as making a handmade mix with one part peat moss, one part garden soil, and two parts builder’s sand or perlite.
  • You can also add a small amount of compost to boost the soil’s nutritional content.
  • However, please don’t give it more than a tenth of the total, as compost likes to retain moisture, which isn’t ideal for this plant.

6. Fertilizer Requirements

  • Unlike other houseplants, this plant may thrive even without fertilizer since it gets nutrients from the soil it grows in.
  • It is, however, important not to let it suffer, as malnutrition will result in stunted growth.
  • Each month, make sure you dissolve a portion of the advised concentration of a proportional fluid-based fertilizer with an equal quantity of phosphorus, potassium, and sodium content in water and use it during the watering time.
  • Aside from the options listed above, you may also utilize the slow-release fertilizer in the form of granules sprinkled into the substrate at the season’s beginning.
  • If you’ve followed the instructions but aren’t sure how much fertilizer to use, it’s advisable to use less because an excessive amount of nutrients is riskier than its deficiency.

Final Remarks

This is an excellent addition for new plant parents. Snake Plants of this species are shorter and wider than other snake plant varieties.

This plant works the night shift, cleaning and purifying the air while you sleep, making it an excellent choice for your bedroom. These babies will survive in any environment, whether a brightly lit room or a dark cave.

Make sure the soil is well-drained before planting. You can safely leave this plant alone for a few weeks if you need some “me” time. This plant also functions as an air purifier!

You should water this plant once a week to keep it happy. Before watering, make sure the top 2 inches of soil are dry. Feed your houseplants once a month using a general-purpose fertilizer indicated for houseplants between March and October.

The plant is simple to cultivate and maintain, as it can survive in various environments, take care of itself when neglected, and purify the air.

Another attractive quality of this plant is that it is extremely difficult to kill, owing to its high lasting capacity, which has led to its widespread popularity.

That is not to imply you should take advantage of its tolerance by failing to provide it with the suitable conditions and attention it requires since extended drought and poor soil can detract from its attractiveness.