A weed eater is an essential tool for any gardener with trimming needs. It can be used in tight spaces, where lawn mowers would otherwise not fit because they’re too heavy-duty.
It is also known by the names string trimmer, hedge trimmer, line trimmer, strimmer, weed whacker, or whipper snipper.
When it’s winter, you probably won’t be cutting your grass with a string trimmer. Make sure to store it properly to have a long service life. Although it is a small machine but its storage is tricky. Continue reading with us to know how to store weed eaters in detail.
- 3 Models of Weed Eaters An Their Storage
- 2 Solutions On How To Store Weed Eater
- Tips On How To Store Weed Eater
3 Models of Weed Eaters An Their Storage
If you’re looking for the best way to store your weed eater, there are a few things worth considering. The first consideration should always be what type of string trimmer you have, whether electric or gas-powered.
The types will determine where exactly they should be stored. So, let’s look at various types of Weed Eater and the proper way to store each.
1. Gas-Powered Weed Eater
The gas weed eater has been around for many decades and uses either gas or a mixture of oil and gas to power it. It is probably the oldest type of line trimmer.
Gas-powered weed eaters provide the most power and run time for large jobs compared to the battery-operating weed eaters.
When storing your weed eater, the first thing you should do is remove any fuel from the tank. It can cause leaks, and gasoline will deteriorate after six months unless stabilizer chemicals have been added in advance.
Leaving leave fuel in the carburetor can also compromise the new fuel that you’ll put when using the line trimmer again.
However, if you still opt to store your gas-powered weed eater with the gasoline inside, then you can make it safe by hanging straight.
Leaving it on its side is not recommended as the gasoline can spill on the engine causing internal damage. It would be best to hang your gas-powered weed eater on the wall to store it properly.
2. Cordless/Battery-Powered Weed Eater
Cordless weed eaters are great because you can take them anywhere. They try to make up for the shortcomings of both cords and gas string trimmers.
They offer mobility without oil mixing, emissions or noise like their counterparts do. They don’t have a fuel tank, so they’re much easier and less messy than gas-powered ones.
However, they use batteries which you have to remove before storing them. It gives your device longer service life. The storage place must be safe, dry and away from electricity. Your garden shed or garage shelves can be the best option in this regard.
3. Corded Electric Weed Eater
Electric weed eaters are fantastic for those with a small yard who want to take care of it easily. Unlike their gas and battery counterparts, these units don’t require any fuel or heavy battery, so they’re super lightweight.
So, there’s not much work if you have an electric weed eater plugged into the wall. Just clean all of its parts and neatly put it at any storage place with its cords wrapped around it. Make sure the storage place is dry and away from excess sunlight.
2 Solutions On How To Store Weed Eater
Weed eaters are awesome tools, but they take up some space, and their storage can be tricky. Hooks and brackets are the most common way to store your weed eater.
But if you have limited space, it might be easiest with shelving. Let’s check these three storage options in detail and see which is the best one.
It’s important to be aware of the dangers of leaving your weed eater lying around where it can easily get trodden on and damaged. You don’t want to risk damaging your weed eater by putting it away incorrectly, so it should only ever hang out on the wall in a garage or other storage area.
A simple way with just a few brackets and hooks will keep these machines safe from harm when not in use. Install these hooks on walls and make sure there’s enough room around both sides for ventilation and security.
It should be high enough not to touch the things below and easily reachable. Here are some reliable brackets available on amazon that will keep your weed eater safe and secure.
2. Wooden Racks
The other great option for storing your line trimmer is a shelving rack made of plywood. It is highly economical as you can hang many items on it at a time.
If you have the time and energy, building custom shelving is easy. Just take a straight piece of plywood, ensuring that it fits your available space.
Make holes or indents in it with the help of a saw and fix it on the wall. It is good to go with all your gardening tools, including a weed eater.
Don’t have the time to make one shelf of your own? Don’t worry; we have the easiest solution for you! Pre-made shelves are available in the market in every size. Buy them and fix them according to your need and given space.
Tips On How To Store Weed Eater
Don’t forget about storing your outdoor items when it’s cold outside. You may end up regretting putting away those spring tools if you store them wrong or forget a few preventative storage steps.
Here are some crucial tips to keep in mind when storing your string trimmer during winter.
1. Clean Before Storing
When you’re done using a weed eater, be sure to clean and dry both ends so that there’s no dirt or other obstructions between them for resistance against ticks.
Empty the gas tank if you are using a gas-powered weed eater.
2. Inspect and Lubricate
It would be best to inspect your device before hanging it to avoid, i.e., inspecting the spark plug, wires, and retainers. Remove the twists and knots in the wire, if any.
Whether it’s a gas, electric or battery string trimmer, make sure to lubricate its metal parts to avoid any rust during the storage. We recommend using WD-40 to dry out moisture to avoid short circuits.
- Drives out moisture and quickly dries out electrical systems to eliminate moisture-induced short circuits
- Acts as a corrosion inhibitor to shield against moisture and other corrosive elements to prevent rust
- Frees sticky mechanisms, loosens rust-to-metal bonds and helps release stuck, frozen or rusted metal parts
- Removes grease, grime, gunk, gum, tar, sap, super glue, sticker residue, and other sticky stuff from multiple surfaces
- Lubricates moving parts such as hinges, wheels, pulleys, rollers, chains, and gears
- Don’t store the machine in a ventilated area that will cause humidity, especially when snowfall outside. It can lead not only to condensation but rust on metal parts too.
- Store them out of direct sunlight to remain safe and protected from rusting.
- Ensure that the weed eater is cold before hanging it on the wall. A warm machine against a cold wall can cause engine damage.
- Don’t forget to tighten all the bolts and screws.
Your gas trimmer is one of the most important tools in your arsenal- it needs to be looked after. A good storage solution will keep your equipment safe from dust and dirt, which can cause damage over time.
This article is a complete guide to help you with storing your weed eater throughout the winter season. Follow the steps as recommended, and you’ll be having your machine in the same condition you left it before 4-5 months!
Leave your comments for asking questions and giving suggestions!