Skip to Content

Why is My Rubber Plant Drooping? 5 Most Common Reasons!

Sharing is caring!

If you’re a fellow plant lover, you can often feel dejected by noticing all the plants you so dearly hold on to go through the process of withering. From the beginning of their existence until the end, all of these plants train you how to thrive and survive in this fast-paced world. They almost imply a chance of survival and prosperity…

If not that, then if we specifically talk about the presence of rubber plants in the spiritual realm, they denote richness, fortune, and happiness. Who would want such a natural gift to be squandered?

So, to save any plant, you must first understand the nature of the plant you are dealing with. The query why is my rubber plant drooping?’  is no exception to this rule. Once done with it, only then you can figure out the issue.

Why is My Rubber Plant Drooping 1
Rubber plant drooping and dropping leaves… – via Reddit

Why is My Rubber Plant Drooping?

Following are some of the main reasons behind ‘why is my rubber plant drooping?’.

1. Sunlight and Nutritional Absence

Just like water, sunlight and nutritional soil play an important role in the growth of a plant. The rubber plant is a tropical forest plant; it doesn’t require rich compost to keep itself healthy. Nonetheless, it still needs the appropriate amount of sunlight, nitrogen, phosphorus, and potassium to thrive in any environment.

The recommended amount of fertilizer for a rubber plant is 10-10-10 (NPK). A tablespoon per square ft of it should be mixed with the soil when the spring arrives. You’ll need to keep this process continued by mixing the fertilizer in the soil after every 2 weeks till the summer ends.

Fertilizer should be avoided during the winter as it won’t help the plant. You’ll also need to ensure that the quantity of fertilizer you are mixing in the soil is appropriate to the level of light your rubber plant receives on a daily basis.

2. Watering Schedule

A rubber plant only needs to be watered once on a weekly basis and requires misting on the leaves in the case where leaves become dusty, to ensure the process of photosynthesis doesn’t get affected.

This watering schedule changes in the winters, when rubber plants are dormant and need little to no water. The soil dries up and should only be watered once every two or three weeks.

However, if the watering schedule is not adequately followed and the rubber plant either gets overwatered or not watered, then the watering schedule adopted inadequately will negatively affect the growth of the rubber plant.

The first visible sign in rubber plants is that their leaves initially start becoming yellow or brown. Then the drooping initiates and gradually, if not taken care of, root damage occurs.

The rubber plant’s leaves can survive without water for weeks because its leaves are capable of storing water. This water storage property helps rubber plants to survive days without water.

But if the plant has to go without water for longer periods, then it can make leaves lose turgor pressure. If not discovered or cared for, properly and on a timely basis, the consequences can be more than just drooping. Eventually, the plant can die.

Ensure to follow proper watering schedules, depending upon the climatic region you live in. For warm humid areas, water once a week and for cold and dry, water once every two and three weeks.

Why is My Rubber Plant Drooping 2
Ruby rubber tree drooping? – via Reddit

3. Waterlogging

Talking about waterlogging is similar to conversing about overwatering. However. there are differences between these two. Sometimes waterlogging has nothing to do with overwatering.

The main element that causes waterlogging in the plants is the type of pot you use and whether it has proper drainage holes or not.

Drainage holes are situated at the bottom of the plant pots and are usually left open for easy water drainage. If the pothole is hindered or gets blocked with hard sand or rocks, water starts getting stored at the bottom of the plant pot.

This waterlogging cause leaves to change color to yellow and get droopy, and eventually, this leads to root rotting in rubber plants. Once the roots start rotting, the leaves speed up dying and falling. However, waterlogging can be stopped by changing the pot or easing the water drainage path. 

4. Cold Environment

Just as we said before that a plant’s nature plays a significant role in its growth, the rubber plant follows the same. It can only survive in a particular environment, specific to certain places around the world, which means they are not found in every country.

The fact that the rubber plants love humidity and hate dry environments is true but they can survive your house’s dry indoor environment if you live in warmer and humid climates. A rubber plant can bear a maximum of 35 degrees centigrades and a minimum temperature of 5 degrees centigrade.

Any region having a temperature above or below that can’t support the survival of your rubber plant.

5. Insects, Pests, or Fungus

The most common reason behind droopy leaves is insects or pests. Mealybugs, mites, thrips and aphids, root-knot nematodes, and scale insects are some of them that can attack your beloved rubber plant.

The type and suffering from insects and pests attacks vary from plant to plant. Some of the insects attack the stems and leaves whereas, some of them directly attack roots to cause root damage. In both cases, leaves react by getting droopy.

Root damage can easily be minimized or avoided by adding and mixing pesticides or fungicides in the soil. In case they have attacked upper areas, you can spray insecticides and pesticides after removing plants from bright sunlight. Three of the safest insecticide, pesticides, and fungicides are:

  1. Safer Brand 5182-6 Insect Killing, Fungicide, and Miticide Neem Oil Concentrate
  2. Dr. Earth 100518126 Final Stop Disease Control Concentrate Fungicide, 24 oz
  3. NaturesGoodGuys Live Beneficial Nematodes Hb+Sc+Sf  
Safer Brand 5182-6 Neem Oil Concentrate Insecticide, Miticide, Fungicide for Plants - Kills Insects and Mites and Controls Fungal Disease - OMRI Listed for Organic Use
  • Multi-Use Spray - This 3-in-1 spray works as a fungicide, miticide, and insecticide to eliminate pests and diseases on your favorite plants
  • Controls Plants Diseases - This spray can be used to prevent and control fungal diseases including black spot, powdery mildew, rust, anthracnose, botrytis, and scab
  • Kills All Stages of Insects - This spray can be used to eliminate eggs, larvae, and adult mites and insects including aphids, beetles, spider mites, whiteflies, and more
  • Peace of Mind - This concentrate is OMRI Listed and compliant for use in organic gardening
  • Protect a Variety of Plants - Apply it on all roses, flowers, herbs, vegetables, houseplants, lawns, trees, and shrubs
Dr. Earth 100518126 Final Stop Disease Control Concentrate Fungicide, 24 oz
  • 100% organic and natural crafted blend
  • Provides ample insect control for weeks with continued protection
  • Available in a 24 ounce concentrate formula
NaturesGoodGuys Live Beneficial Nematodes Hb+Sc+Sf - Kills Over 200 Different Species of Soil Dwelling and Wood Boring Insects. (5 Million_Nematodes)
  • Check the "Guide" under images to determine which nematodes you need.
  • ++Hb (Heterohabditis bacteriophora) ++Sc (Steinernema carpocapsae) ++Sf (Steinernema feltiae)
  • Guaranteed Fresh and Alive!


While concluding we would say, unquestionably, every plant that dies in your yard comes as a shock, especially if you are aware of global warming, heatwaves, and all the dreadful implications of the events unfolding.

The best thing you can do to avoid the ‘why is my rubber plant drooping?’ crisis is to ensure proper sunlight, organic fertilizers, organic pesticides, and an adequate amount of water with a proper watering schedule.